How to Fix a “No Internet Secured” Error in Windows 10 & 11

Seeing “No Internet, Secured” pop up on your Windows Wi-Fi connection? You’re not alone—and thankfully, this issue is usually fixable without too much hassle. Whether you’re on Windows 10 or 11, here’s a straightforward guide to get your connection back up and running.

What Does “No Internet, Secured” Actually Mean?

This error means your device is connected to a Wi-Fi network, but it can’t reach the internet. Your PC thinks it’s secure, but there’s no data getting through. The problem could be with your device, your router, or your internet service provider.

Quick Fixes to Try First

Before diving into deeper solutions, try these simple steps:

• Restart your PC – Obvious, but it often works.
• Reboot your router – Unplug it for 10 seconds and plug it back in.
• Forget and reconnect to the Wi-Fi network – This resets the connection.

If none of these fix it, move on to the solutions below.

1. Disable and Re-enable Your Network Adapter

1. Press Windows + X and select Device Manager.
2. Expand Network adapters.
3. Right-click your Wi-Fi adapter and choose Disable.
4. Wait a few seconds, then right-click again and select Enable.

This refreshes the network hardware and can clear glitches.

2. Run the Windows Network Troubleshooter

1. Go to Settings > Network & Internet.
2. Select Status on the left, then click Network troubleshooter.
3. Follow the prompts.

Windows will try to diagnose and repair the issue automatically.

3. Change Your DNS Settings

Sometimes the DNS (Domain Name System) server is the problem.

1. Open Control Panel > Network and Sharing Center.
2. Click your Wi-Fi connection > Properties.
3. Double-click Internet Protocol Version 4 (TCP/IPv4).
4. Select Use the following DNS server addresses and enter:
   • Preferred DNS server: 8.8.8.8
   • Alternate DNS server: 8.8.4.4
5. Click OK and close all windows.

These are Google’s public DNS servers, and they’re often faster and more reliable.

4. Update Your Network Adapter Driver

1. Open Device Manager.
2. Right-click your Wi-Fi adapter > Update driver.
3. Select Search automatically for drivers.

If Windows doesn’t find a new driver, you can also visit your PC or adapter manufacturer’s website for the latest version.

5. Reset TCP/IP Stack and Winsock

Use Command Prompt to reset your network configuration:

1. Type cmd in the Start menu, right-click Command Prompt, and select Run as administrator.
2. Enter the following commands one by one:

netsh winsock reset
netsh int ip reset
ipconfig /release
ipconfig /renew
ipconfig /flushdns

3. Restart your PC.

This can resolve corrupted settings that block internet access.

6. Turn Off IPv6 (If Necessary)

Some users find disabling IPv6 fixes the issue.

1. Open Control Panel > Network and Sharing Center.
2. Click your Wi-Fi connection > Properties.
3. Uncheck Internet Protocol Version 6 (TCP/IPv6).
4. Click OK.

Try reconnecting after this change.

Still Not Working?

If you’ve tried all of the above and still see “No Internet, Secured,” the issue may be with your router or your ISP. Try connecting another device to the same network. If it also can’t connect, contact your internet provider.

Wrap-Up

The “No Internet, Secured” error in Windows 10 or 11 is annoying, but usually fixable. These steps help you isolate and fix the issue, whether it’s a bad DNS setting, a flaky adapter, or a misbehaving protocol.

Still stuck or want a more permanent fix for flaky Wi-Fi? Consider switching to a wired Ethernet connection or upgrading your router.

Got another tech headache? Leave a comment and I’ll cover it in a future post.